Changes for page Mission Director Guide

Last modified by Klaus Meyer on 2025/03/31 16:39

From 32965.1 to 32966.1 From 32970.11 to 32970.12

From version 32966.1

edited by Daniel Turner
on 2023/08/24 13:29

Change comment: There is no comment for this version

To version 32970.11

edited by Heinrich Unrau
on 2024/10/17 12:55

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--xwiki:XWiki.Daniel
++xwiki:XWiki.Heinrich

Content

@@ -407,11 +407,11 @@
  Most of the attribute values in actions and conditions are interpreted as script expressions and parsed accordingly. An expression is a phrase that can be evaluated to a single value. The simplest expressions are actual numeric values and strings, so called **literals:**
--* {{code language="xml"}}0{{/code}} (integer number)
--* {{code language="xml"}}0772{{/code}} (leading 0 means octal integer number)
--* {{code language="xml"}}3.14159{{/code}} (floating point number)
--* {{code language="xml"}}5e12{{/code}} (float in exponent notation, "times ten to the power of")
--* {{code language="xml"}}0xCAFE{{/code}} (hexadecimal integer number)
++* {{code language="xml"}}0{{/code}}(integer number)
++* {{code language="xml"}}0772{{/code}}(leading 0 means octal integer number)
++* {{code language="xml"}}3.14159{{/code}}(floating point number)
++* {{code language="xml"}}5e12{{/code}}(float in exponent notation, "times ten to the power of")
++* {{code language="xml"}}0xCAFE{{/code}}(hexadecimal integer number)
  {{info}}
  Since octal numbers are hardly ever used (usually unknowingly), the parser is will produce a warning if an octal number is encountered."
@@ -420,7 +420,7 @@
  You can write string literals by putting the string in single quotes:
  * {{code language="xml"}}'Hello world'{{/code}}
--* {{code language="xml"}}''{{/code}} (empty string)
++* {{code language="xml"}}''{{/code}}(empty string)
  * {{code language="xml"}}'String with a line break\n'{{/code}}
  {{info}}
@@ -432,12 +432,12 @@
  Numbers can have a suffix that determines their numeric type. There are also numerical data types like "money" or "time" which can only be expressed by using an appropriate unit suffix:
--* {{code language="xml"}}5000000000L{{/code}} (large integer)
--* {{code language="xml"}}1f{{/code}} (floating point number, same as 1.0, just 1 would be an integer)
--* {{code language="xml"}}1000Cr{{/code}} (Money in Credits, converted to 100000 cents automatically)
--* {{code language="xml"}}500m{{/code}} (Length in metres)
--* {{code language="xml"}}10s{{/code}} (Time in seconds)
--* {{code language="xml"}}1h{{/code}} (Time in hours, which is converted to 3600s automatically)
++* {{code language="xml"}}5000000000L{{/code}}(large integer)
++* {{code language="xml"}}1f{{/code}}(floating point number, same as 1.0, just 1 would be an integer)
++* {{code language="xml"}}1000Cr{{/code}}(Money in Credits, converted to 100000 cents automatically)
++* {{code language="xml"}}500m{{/code}}(Length in metres)
++* {{code language="xml"}}10s{{/code}}(Time in seconds)
++* {{code language="xml"}}1h{{/code}}(Time in hours, which is converted to 3600s automatically)
  A space between number and suffix is allowed.
@@ -517,7 +517,41 @@
  {{code language="xml"}}cos(60deg){{/code}}
  \\{{code language="xml"}}cos(pi){{/code}}|
  {{code language="xml"}}0.5{{/code}}
--\\{{code language="xml"}}0.0{{/code}}|Cosine (function-style, parentheses required)
++\\{{code language="xml"}}-1.0{{/code}}|Cosine (function-style, parentheses required)
++|tan|unary|
++{{code language="xml"}}tan(-45deg){{/code}}
++\\{{code language="xml"}}tan(45deg){{/code}}|
++{{code language="xml"}}-1.0{{/code}}
++\\{{code language="xml"}}1.0{{/code}}|(((
++Tangent (function-style, parentheses required)
++
++Available from X4 v7.0
++)))
++|asin|unary|
++{{code language="xml"}}asin(-0.5f){{/code}}
++\\{{code language="xml"}}asin(1){{/code}}|
++{{code language="xml"}}-0.523599rad{{/code}}
++\\{{code language="xml"}}1.5708rad{{/code}}|(((
++Inverse sine (function-style, parentheses required)
++
++Available from X4 v7.0
++)))
++|acos|unary|
++{{code language="xml"}}acos(-0.5f){{/code}}
++\\{{code language="xml"}}acos(1.0f){{/code}}|
++{{code language="xml"}}2.0944rad{{/code}}
++\\{{code language="xml"}}0rad{{/code}}|(((
++Inverse cosine (function-style, parentheses required)
++
++Available from X4 v7.0
++)))
++|atan|unary|
++{{code language="xml"}}atan(1.0f){{/code}}|
++{{code language="xml"}}0.785398rad{{/code}}|(((
++Inverse tangent (function-style, parentheses required)
++
++Available from X4 v7.0
++)))
  |sqrt|unary|{{code language="xml"}}sqrt(2){{/code}}|{{code language="xml"}}1.414213LF{{/code}}|Square root (function-style, parentheses required)
  |exp|unary|{{code language="xml"}}exp(1){{/code}}|{{code language="xml"}}2.71828LF{{/code}}|Exponential function (function-style, parentheses required)
  |log|unary|{{code language="xml"}}log(8) / log(2){{/code}}|{{code language="xml"}}3.0LF{{/code}}|Natural logarithm (function-style, parentheses required)
@@ -547,7 +547,7 @@
  gt
  \\> (>)|binary|
  {{code language="xml"}}1 gt 3{{/code}}
--\\{{code language="xml"}}1 < 3{{/code}}|{{code language="xml"}}false{{/code}}|Greater than
++\\{{code language="xml"}}1 > 3{{/code}}|{{code language="xml"}}false{{/code}}|Greater than
  |
  ge
  \\>=|binary|
@@ -596,8 +596,8 @@
  There is a way to convert a number into a different type manually: You append the corresponding suffix to a sub-expression in parentheses, like this:
--* {{code language="xml"}}(1 + 1)f{{/code}} ⟹ {{code language="xml"}}2f{{/code}} ⟹ {{code language="xml"}}2.0{{/code}}
--* {{code language="xml"}}(1h) m / (180deg) i{{/code}} ⟹ {{code language="xml"}}(3600s) m / (3.14rad) i{{/code}} ⟹ {{code language="xml"}}3600m / 3{{/code}} ⟹ {{code language="xml"}}1200m{{/code}}
++* {{code language="xml"}}(1 + 1)f{{/code}}⟹ {{code language="xml"}}2f{{/code}} ⟹ {{code language="xml"}}2.0{{/code}}
++* {{code language="xml"}}(1h) m / (180deg) i{{/code}}⟹ {{code language="xml"}}(3600s) m / (3.14rad) i{{/code}} ⟹ {{code language="xml"}}3600m / 3{{/code}} ⟹ {{code language="xml"}}1200m{{/code}}
  When converting to a non-default unit type, this means you interpret the number as in the given units: "{{code language="xml"}}(1km + 500m)h{{/code}}" means that you interpret 1500m as 1500 hours, so the resulting value will be 1500x3600 seconds. (As stated above, the default unit for a length is metres.)
@@ -605,8 +605,8 @@
  Every data type can be combined with a string with the + operator, and will be converted to a string representation. That way you can also concatenate strings and numbers:
--* {{code language="xml"}}'One plus one is equal to ' + (1+1) + '.'{{/code}} ⟹ {{code language="xml"}}'One plus one is equal to 2.'{{/code}}
--* {{code language="xml"}}'One plus one is not equal to ' + 1 + 1 + '.'{{/code}} ⟹ {{code language="xml"}}'One plus one is not equal to 11.'{{/code}}
++* {{code language="xml"}}'One plus one is equal to ' + (1+1) + '.'{{/code}}⟹ {{code language="xml"}}'One plus one is equal to 2.'{{/code}}
++* {{code language="xml"}}'One plus one is not equal to ' + 1 + 1 + '.'{{/code}}⟹ {{code language="xml"}}'One plus one is not equal to 11.'{{/code}}
  As you can see, operators of the same precedence (+ in this case) are always evaluated from left to right.
@@ -638,9 +638,9 @@
  \\**[New as of X Rebirth 4.0]**
  \\ With the formatting syntax above, it is even possible to control how the parameter is formatted, using modifiers between "%" and the parameter specifier ("s" or the parameter number):
--* {{code language="xml"}}'%,s'.[12345678]{{/code}} ⟹ {{code language="xml"}}'12,345,678'{{/code}} (the "," modifier shows a number with thousands separators, correctly localised)
--* {{code language="xml"}}'%.3s'.[123.4]{{/code}} ⟹ {{code language="xml"}}'123.400'{{/code}} (show 3 fractional digits, rounding half away from zero - decimal point correctly localised)
--* {{code language="xml"}}'%,.1s'.[12345.67]'{{/code}} ⟹ {{code language="xml"}}'12,345.7'{{/code}} (combination of the above)
++* {{code language="xml"}}'%,s'.[12345678]{{/code}}⟹ {{code language="xml"}}'12,345,678'{{/code}} (the "," modifier shows a number with thousands separators, correctly localised)
++* {{code language="xml"}}'%.3s'.[123.4]{{/code}}⟹ {{code language="xml"}}'123.400'{{/code}} (show 3 fractional digits, rounding half away from zero - decimal point correctly localised)
++* {{code language="xml"}}'%,.1s'.[12345.67]'{{/code}}⟹ {{code language="xml"}}'12,345.7'{{/code}} (combination of the above)
  Additional remarks:
@@ -685,13 +685,13 @@
  These restrictions only apply to the keys, there are no restrictions for values that you assign to them. For example:
--* {{code language="xml"}}table[]{{/code}} ⟹ creates an empty table
--* {{code language="xml"}}table[{0} = null]{{/code}} ⟹ creates a table that maps the number 0 to null
++* {{code language="xml"}}table[]{{/code}}⟹ creates an empty table
++* {{code language="xml"}}table[{0} = null]{{/code}}⟹ creates a table that maps the number 0 to null
--* {{code language="xml"}}table[{'$foo'} = 'bar']{{/code}} ⟹ a table that maps the string '$foo' to the string 'bar'
--* {{code language="xml"}}table[$foo = 'bar']{{/code}} ⟹ exactly the same, just a shorter notation for string keys
--* {{code language="xml"}}table[foo = 'bar']{{/code}} ⟹ error, 'foo' does not start with a '$'
--* {{code language="xml"}}table[{1} = [], {2} = table[]] {{/code}} ⟹ a table that maps 1 to an empty list and 2 to an empty table
++* {{code language="xml"}}table[{'$foo'} = 'bar']{{/code}}⟹ a table that maps the string '$foo' to the string 'bar'
++* {{code language="xml"}}table[$foo = 'bar']{{/code}}⟹ exactly the same, just a shorter notation for string keys
++* {{code language="xml"}}table[foo = 'bar']{{/code}}⟹ error, 'foo' does not start with a '$'
++* {{code language="xml"}}table[{1} = [], {2} = table[]] {{/code}}⟹ a table that maps 1 to an empty list and 2 to an empty table
  Just like lists, tables are stored as references, so it's possible that multiple variables reference the same table (see above).
@@ -712,10 +712,10 @@
  You can look up a property by appending a dot and the key in curly braces:
--* {{code language="xml"}}[100, 200, 300, 400].{1}{{/code}} ⟹ 100 (reading the first element)
--* {{code language="xml"}}[100, 200, ['Hello ', 'world']] .{3}.{2}{{/code}} ⟹ 'world' (second element of the inner list, which is the third element of the outer list)
--* {{code language="xml"}}[].{'count'}{{/code}} ⟹ 0
--* {{code language="xml"}}table[{21} = 42].{21}{{/code}} ⟹ 42
++* {{code language="xml"}}[100, 200, 300, 400].{1}{{/code}}⟹ 100 (reading the first element)
++* {{code language="xml"}}[100, 200, ['Hello ', 'world']] .{3}.{2}{{/code}}⟹ 'world' (second element of the inner list, which is the third element of the outer list)
++* {{code language="xml"}}[].{'count'}{{/code}}⟹ 0
++* {{code language="xml"}}table[{21} = 42].{21}{{/code}}⟹ 42
  In most cases the property key is a fixed string, like "name" or "class". You can write this like above:
@@ -739,19 +739,19 @@
  **min'** and '**max'** return the minimum or maximum (all elements have to be numeric)
--* {{code language="xml"}}[1, 6, 8].min{{/code}} ⟹ 1
++* {{code language="xml"}}[1, 6, 8].min{{/code}}⟹ 1
  **average'** returns the average (but all element types have to be compatible)
--* {{code language="xml"}}[1, 6, 8].average{{/code}} ⟹ 5
++* {{code language="xml"}}[1, 6, 8].average{{/code}}⟹ 5
  **indexof'** is followed by another property, and the index of the first occurence of that key in the list is returned, or 0 if it's not in the list
--* {{code language="xml"}}[1, 6, 8].indexof.{8}{{/code}} ⟹ 3
++* {{code language="xml"}}[1, 6, 8].indexof.{8}{{/code}}⟹ 3
  **clone'** creates a shallow copy of the list (i.e. lists that are contained as elements in the list are not copied, only the reference to them)
--* {{code language="xml"}}[1, 6, 8].clone{{/code}} ⟹ {{code language="xml"}}[1, 6, 8]{{/code}}
++* {{code language="xml"}}[1, 6, 8].clone{{/code}}⟹ {{code language="xml"}}[1, 6, 8]{{/code}}
  A table has different properties:
@@ -775,20 +775,20 @@
  If you look up a property that does not exist, there will be an error, and the result will be null. To test whether a property exists, you can append a question mark "?" to the lookup, which yields true or false:
--* {{code language="xml"}}$list.{5}{{/code}} ⟹ The fifth element of a list - however, if $list has less than 5 elements (and if it's also not a table with the key 5), there will be an error
--* {{code language="xml"}}$list.{5}?{{/code}} ⟹ true if $list exists and has the property 5, false otherwise
--* {{code language="xml"}}$table.$key?{{/code}} ⟹ Analogously, true if $table exists and has the string property '$key'
++* {{code language="xml"}}$list.{5}{{/code}}⟹ The fifth element of a list - however, if $list has less than 5 elements (and if it's also not a table with the key 5), there will be an error
++* {{code language="xml"}}$list.{5}?{{/code}}⟹ true if $list exists and has the property 5, false otherwise
++* {{code language="xml"}}$table.$key?{{/code}}⟹ Analogously, true if $table exists and has the string property '$key'
  The question mark can even be applied to variables:
--* {{code language="xml"}}$list{{/code}} ⟹ The value stored under the name $list, or an error if there is no such variable
--* {{code language="xml"}}$list?{{/code}} ⟹ true if the variable exists, false otherwise
++* {{code language="xml"}}$list{{/code}}⟹ The value stored under the name $list, or an error if there is no such variable
++* {{code language="xml"}}$list?{{/code}}⟹ true if the variable exists, false otherwise
  To look up the value of a property although it may not exist, you can use the at-sign "@" as prefix:
--* {{code language="xml"}}@$list.{5}{{/code}} ⟹ The result of the $list lookup if $list exists and has the property 5, otherwise null (without error message)
--* {{code language="xml"}}@$list{{/code}} ⟹ The list if this variable exists, null otherwise
--* {{code language="xml"}}@$list.{5}.{1}{{/code}} ⟹ The first element of the fifth element of $list, if it exists, null otherwise
++* {{code language="xml"}}@$list.{5}{{/code}}⟹ The result of the $list lookup if $list exists and has the property 5, otherwise null (without error message)
++* {{code language="xml"}}@$list{{/code}}⟹ The list if this variable exists, null otherwise
++* {{code language="xml"}}@$list.{5}.{1}{{/code}}⟹ The first element of the fifth element of $list, if it exists, null otherwise
  As you can see, an error is already prevented if any link in the property chain does not exist. But use the @ prefix with care, since error messages are really helpful for detecting problems in your scripts. The @ prefix only suppresses property-related error messages and does not change any in-game behaviour.
@@ -896,10 +896,10 @@
  \\Numbers don't have any properties, except for money and time: They have a "**formatted**" property, which allows you to get a custom string representation with more advanced options than the [[generic formatting method>>||anchor="HStringsandformatting" style="outline-width: 0px !important; user-select: auto !important;"]] for numbers.
  * {{code language="xml"}}$money.formatted.{'formatstring'}{{/code}}
--* {{code language="xml"}}$money.formatted.default{{/code}} (using default format string '%s')
++* {{code language="xml"}}$money.formatted.default{{/code}}(using default format string '%s')
  * {{code language="xml"}}$time.formatted.{'formatstring'}{{/code}}
--* {{code language="xml"}}$time.formatted.default{{/code}} (using default format string '%T')
++* {{code language="xml"}}$time.formatted.default{{/code}}(using default format string '%T')
  In scripts, money is stored in cents, not Credits. The formatted representation always shows the value in Credits, including thousands separators.
@@ -933,10 +933,10 @@
  Examples:
--* {{code language="xml"}}(151s).formatted.{'%T'}{{/code}} ⟹ {{code language="xml"}}'00:02:31'{{/code}}
--* {{code language="xml"}}(151s).formatted.default{{/code}} ⟹ {{code language="xml"}}'00:02:31'{{/code}} (same as {'%T'})
--* {{code language="xml"}}(151s).formatted.{'%.3T'}{{/code}} ⟹ {{code language="xml"}}'00:02:31.000'{{/code}}
--* {{code language="xml"}}(151s).formatted.{'%h:%M'}{{/code}} ⟹ {{code language="xml"}}'0:02'{{/code}}
++* {{code language="xml"}}(151s).formatted.{'%T'}{{/code}}⟹ {{code language="xml"}}'00:02:31'{{/code}}
++* {{code language="xml"}}(151s).formatted.default{{/code}}⟹ {{code language="xml"}}'00:02:31'{{/code}} (same as {'%T'})
++* {{code language="xml"}}(151s).formatted.{'%.3T'}{{/code}}⟹ {{code language="xml"}}'00:02:31.000'{{/code}}
++* {{code language="xml"}}(151s).formatted.{'%h:%M'}{{/code}}⟹ {{code language="xml"}}'0:02'{{/code}}
  === Complete property documentation ===
@@ -948,7 +948,7 @@
  scriptproperties.html has to load files from different folders, which modern browsers do not allow by default for security reasons. In order to open scriptproperties.html, the following is required:
  * Firefox: On the about:config page, the value of "security.fileuri.strict_origin_policy" has to be changed to "false".
--* Chrome: The Chrome launcher has to be started with the command-line parameter --allow-file-access-from-files--
++* Chrome: The Chrome launcher has to be started with the command-line parameter --~-~---allow-file-access-from-files
  {{/info}}
  This provides you with a complete list of all supported "base keywords" and properties. To filter in this list, you can enter an expression in the text field:
@@ -973,6 +973,27 @@
  * MD scripts and cues are identified by their names. So a script can only be refreshed if it has the same script name as before (file name is irrelevant).
  * If there are new script files or new cue nodes (i.e. scripts/cues with new names) they are created and added properly. If you remove script files or cue nodes, the corresponding scripts/cues are removed from the game, including instances.
++** If you remove a cue and then later add another cue with the same name, old save files will not know that the cue has been removed inbetween. In the following example the first cue was crea
++{{code language="xml"}}<cue name="Deprecated_Test1" namespace="this">
++  <actions>
++    <set_value name="$val_1" exact="'old value'"/>
++    <debug_text text="$val_1"/>
++  </actions>
++</cue>
++
++<cue name="Deprecated_Test1" namespace="this">
++  <actions>
++    <set_value name="$val_2" exact="'new value'"/>
++    <debug_text text="$val_2"/>
++  </actions>
++  <cues>
++    <cue name="PrintValue">
++      <actions>
++        <debug_text text="parent.$val_2"/>
++      </actions>
++    </cue>
++  </cues>
++</cue>{{/code}}
  * As a consequence, you CANNOT rename scripts or cues if you want to refresh them. Doing so would remove the old script or cue and add a new one with the new name.
  * You CANNOT change a <cue> to a <library> or vice versa.
  * You CANNOT add, remove, or change the "ref" attribute of a cue. But it is possible to remove the whole cue. (If all references to a library are removed you can also remove the library itself.)

Changes for page Mission Director Guide

Summary

Details

Navigation

Applications